Step-by-Step Guide to Setting Up a Vape Device
Just bought a new vape kit and not sure where to start? Don't worry — setting up a vape device is much easier than it looks. Whether you've purchased a pod system, starter kit, or a more advanced vape mod, this guide will walk you through everything step by step.
If you've picked up your device from EcoSmok, you're already off to a great start. Now let's get you vaping properly.
Step 1: Choose the Right Vape Device
Before setup, make sure you're using the right type of kit for your needs. The most common options include:
- Pod Kits – Simple, compact and beginner-friendly
- Starter Vape Kits – Great for smokers switching to vaping
- Advanced Mods – Adjustable power and custom settings
- Prefilled Pod Kits – Low maintenance and convenient
You can browse a wide selection of beginner and advanced devices here:
Innokin Endura T22 Pro Kit
Powerful MTL vape kit with 3000mAh battery for all-day vaping, 2ml top-fill tank, and 4 adjustable power levels (9.5-13.5W). Perfect for beginners with simple one-button operation and USB-C fast charging.
All-day power
Easy refilling
9.5-13.5W adjustable
5V/2A charging
Step 2: Charge Your Vape Device
- Most vape kits come partially charged, but it's always best to fully charge your device before first use
- Use the provided USB-C or micro-USB cable
- Plug into a safe power source (avoid fast chargers unless specified)
- Wait until fully charged — indicator lights will show status
Battery capacity is measured in mAh (milliamp hours). The higher the mAh, the longer your battery will last between charges.
Step 3: Insert or Install the Coil (If Required)
If you're using a refillable tank or pod system, you may need to install a coil before filling.
- Coils are responsible for heating the e-liquid and turning it into vapour
- Make sure you're using the correct replacement coils for your device
You can find compatible replacement coils here: Replacement Vape Coils
Tip: Always prime your coil before first use (see Step 5).
Step 4: Fill Your Pod or Tank with E-Liquid
- If your device is refillable, locate the filling port (usually sealed with a rubber plug)
- Open the fill port carefully
- Insert the nozzle of your e-liquid bottle
- Fill slowly to avoid overfilling
- Close the seal securely
Choosing the right e-liquid matters:
- Nic Salts – Best for pod kits and MTL vaping
- Freebase 50/50 – Balanced throat hit
- High VG – Ideal for sub-ohm kits
Explore our full ranges: Nicotine Salts | E-Liquids
Step 5: Prime the Coil (Very Important)
- Priming prevents dry hits and burnt coils
- After filling your tank or pod: Let the device sit upright for 5–10 minutes
- This allows the cotton inside the coil to fully absorb e-liquid
- Skipping this step can burn your coil instantly
Step 6: Turn On the Device
- Most vape devices turn on with five quick clicks of the power button
- Some pod kits are draw-activated and do not require a button — simply inhale to activate
Ongoing Maintenance
- Replace coils every 1–2 weeks (or when flavour drops)
- Keep your device clean and dry
- Charge responsibly
- Store away from extreme heat
Stock up on essentials: Replacement Coils | Nic Salt E-Liquids
Common Beginner Mistakes to Avoid
- Not priming the coil
- Using the wrong e-liquid type
- Overfilling the pod or tank
- Running the tank completely dry
- Using high nicotine in sub-ohm devices
Frequently Asked Questions
Charge fully before first use. Most devices take 45–120 minutes depending on battery size.
If you notice a burnt taste, reduced vapour, or muted flavour, it's time to replace the coil.
Heavy smokers may prefer 10–20mg nic salts in pod kits. Lighter users often choose 3–6mg freebase liquids in sub-ohm devices.
Ready to Vape?
Setting up a vape device doesn't have to be complicated. With the right kit, the correct e-liquid, and proper coil care, you'll enjoy a smooth and satisfying vaping experience from day one.
Browse the latest devices, e-liquids, coils and accessories at EcoSmok UK and get everything you need in one place.