SMOK Nord 50W Pod Vape Kit

The SMOK Nord 50W Pod Vape Kit is a compact, all-round device suited to both new and experienced vapers. It runs on a built-in 1800mAh battery with a maximum output of 50W, and the starter kit comes with two pods so you can get vaping straight away. It's built primarily for MTL (mouth-to-lung) vaping and works with the SMOK Nord coil series and SMOK LP2 Replacement Coils, giving you plenty of room to fine-tune your setup.

The pods use a leak-resistant design to keep e-liquid contained, and a built-in screen keeps you informed with atomiser recognition, lithium-ion protection, low voltage warnings, over-temperature protection and short-circuit protection. If you're after a dependable Nord-style device, this kit covers the basics well.

Build Quality

The Nord 50W is available in two finishes: a regular in-mould labelling design and a Leather Series option for a more premium look and feel.

Battery & Charging

A built-in 1800mAh battery supports a full day of typical use, and USB-C charging means you're not left waiting around when it's time to top up.

Key Features

• Brand: SMOK
• Vape kit type: sub-ohm pod vape kit
• Dimensions: 97 x 31 x 22.6mm (Regular) / 98 x 32 x 23.9mm (Leather)
• Battery: 1800mAh built-in
• Vaping style: MTL and RDTL
• Pod capacity: 2ml
• Coil resistance range: 0.23 to 1.2 Ohm
• Charging: USB-C
• Refilling: side-fill
• Power output: 5 to 50W

Compatible Coils & Pods

The Nord 50W works with three pod styles, the RPM Pod, LP2 Pod and Nord Pod, each holding 2ml of e-liquid. Coils push-fit into the pods and are sold separately, so you can pick the coil that matches your vaping style. Empty SMOK Nord 50W replacement pods are available so you can fit whichever coil suits you best.

• LP2 Meshed 0.23 Ohm DTL Coil: A leak-resistant DTL coil with a large contact area for bigger clouds. Best used between 20 and 45W.
• LP2 DC 0.6 Ohm MTL Coil: An MTL-style dual coil with the same leak-resistant build, giving solid vapour and flavour. Best used between 15 and 25W.
• Nord Regular DC 0.6 Ohm Coil: A dual coil that heats up quickly for stronger flavour. Recommended at 20W.
• Nord DC 0.8 Ohm MTL Coil: Built for MTL vaping with a larger wicking area and faster heat-up. Best used at 16W.
• Nord Mesh MTL 0.8 Ohm Coil: An MTL mesh coil balancing cloud and flavour, with a longer lifespan. Maximum power of 16W.
• Nord 0.6 Ohm Mesh Coil: Designed for sub-ohm vaping and larger vapour production.
• RPM Mesh 0.4 Ohm Coil: Fast heating with a strong flavour focus. Best used at 25W.
• RPM DC 0.8 Ohm MTL Coil: A dual coil MTL option with a larger area for good vapour and flavour. Best used at 16W.
• RPM Quartz 1.2 Ohm Coil: Delivers a cleaner flavour with a similarly quick heat-up. Best used at 12W.
• RPM SC 1.0 Ohm Coil: A single coil option for a denser, more intense vapour. Best used at 14W.
• RPM Triple Coil 0.6 Ohm: Quick ramp-up with strong flavour and vapour output. Best used at 25W.
• RPM MTL Mesh 0.3 Ohm Coil: A power-efficient MTL coil with a longer lifespan. Best used between 10 and 15W.

Suitable E-Liquids

The Nord 50W is designed to work with a wide range of e-liquid types, so you can switch up your vaping style whenever you like. It pairs well with high VG shortfills and nicotine salts, depending on which coil you're running.

For MTL vaping, a 50/50 VG/PG e-liquid is generally the better fit, while 70/30 blends suit the DTL coils. The tighter MTL coils work especially well with nic salts at higher strengths, brands such as Bar Juice and Elfliq Nic Salts are a solid match. On the DTL coils at higher wattage, freebase e-liquids at 3mg or lower make more sense, nic salts aren't suited to DTL-level output. Thicker high-VG liquids can struggle to wick properly on the MTL coils at lower wattages, so it's worth matching the liquid to the coil you're using. If you'd like a few nic salt flavours to try, our nic salt multipacks include SMOK-friendly options.

How to Refill the SMOK Nord 50W Pods

1. Remove the pod from the device.
2. Lift the rubber stopper on the side of the pod to reveal the fill port.
3. Fill slowly with your chosen e-liquid, taking care not to overfill.
4. Push the rubber stopper firmly back into place to seal the pod.
5. Click the pod back into the device.
6. Leave it to sit for 5 to 10 minutes so the coil can fully saturate before use.

What's in the Box

• 1 x SMOK Nord 50W Device
• 2 x Replacement Pods
• 1 x USB-C Charging Cable
• User Manual

FAQs

Is the SMOK Nord 50W suitable for beginners?

Yes. Its adjustable wattage and range of coil options make it flexible enough for newer vapers looking for an easy MTL setup, while still offering enough range for more experienced users who want to experiment with different coils.

Can I use the Nord 50W for both MTL and DTL vaping?

Yes. With the right coil fitted, the device supports both MTL and RDTL vaping styles, so you can switch depending on the coil and e-liquid you're using.

Which pods work with the SMOK Nord 50W?

The Nord 50W is compatible with the RPM Pod, LP2 Pod and Nord Pod, each holding 2ml. Coils are sold separately and push-fit into any of these pods.

How long does a coil typically last?

Coil lifespan varies with usage, but most coils last up to around 14 days of regular vaping before flavour starts to drop off and it's time for a replacement.

What type of e-liquid should I use with this kit?

That depends on the coil fitted. MTL coils generally pair best with 50/50 e-liquids or nic salts, while DTL coils suit higher VG shortfills or freebase e-liquids at lower strengths.

Does the SMOK Nord 50W have safety protections built in?

Yes. It includes atomiser recognition, lithium-ion battery protection, low voltage warnings, over-temperature protection and short-circuit protection, with device status shown on the built-in screen.